TMCM-1043

Overview and features

The tmcm-1043 is a simple, compact, single-axle drive board.It allows the motor to be controlled by a pulse directional signal,And can be directly controlled by PLC or external Step/Dir controller board.Processing is simple and no further configuration is required.Nominal supply voltages are 12V DC and 24V DC.The driving capability is fixed at 1.1a RMS.The module provides very high micro-step resolution and a TRINMICs spreadCycle chopper,Smooth motor movement can be achieved.Tmcm-1043 is equipped with error output and additional output.The board is mounted directly on the back of NEMA17 stepper motor.Using the tmcm-1043 USB serial programmer suite,Tmcm-1043 can be configured with up to 1.4a RMS current, 2A peak. In addition, standby current can be used.

Features:

Short detection

SpreadCycle is low noise, anti - resonance and anti - vibration

Electrical parameters:

Number of suitable axes: 1

Motor type: Stepper

Root mean square current: 1.1a

Voltage: 9 v - 28 v

Maximum segmentation: 256

Pulse/direction control: yes

Subdivision interpolation: 16 to 256

Bus protocol :(TMCL)**

Digital outlet: 2

Overall size: 37 x 37mm2

Matching installation motor: NEMA8

Blocking function: yes

Current dynamic regulation function: yes

Jitter suppression: yes

Development and software

With its optional programming suite, the tmcm-1043 is a fully customizable intelligent driver level that can accommodate a variety of embedded motion control and mechatronics requirements.

The desktop programmer suite features an intuitive GUI for evaluation and ideal parameter selection, programmers and branch cables, motors and power supplies that can be started quickly and easily.