CC2630F128RHBR

The CC2630 is a wireless MCU for ZigBee and 6LoWPAN applications.This device is part of the CC26xx family of cost-effective ultra-low power 2.4GHz RF devices.Extremely low active RF and MCU currents and low power mode current consumption ensure excellent battery life, allowing small coin cell batteries to be used in energy harvesting applications.The CC2630 includes a 32-bit ARM Cortex-M3 processor that operates at 48MHz the same frequency as the host processor and features a rich set of peripheral features, including a unique ultra-low-power sensor controller for when the system is in sleep mode.Ideal for connecting external sensors and/or autonomously acquiring analog and digital data while the system is in sleep mode.

With this feature, the CC2630 is ideal for battery-powered and energy harvesting terminal nodes in ZigBee/6LoWPAN networks.

The IEEE 802.15.4 MAC is embedded in ROM and runs separately on the ARM Cortex?-M0 processor. 

This architecture improves overall system performance and power consumption and frees up flash for supply.

The ZigBee protocol stack is available free of charge at www.ti.com.

Characteristic

Microcontroller

Powerful ARM Cortex-M3

EEMBC CoreMark Rating: 142

Up to 48MHz clock speed

128KB in-system programmable flash memory

8KB Cache Static RAM (SRAM)

20KB ultra low leakage current SRAM

2-pin cJTAG and JTAG debug

Support for wireless upgrade (OTA)

Ultra-low-power sensor controller efficient code size architecture, load driver in ROM, IEEE 802.15.4 MAC, and boot loader

Independently independent of the rest of the system autonomous operation

16-bit architecture

20KB ultra low leakage current code and data SRAM

Package is RoHS compliant

4mm × 4mm RSM QFN32 (10 GPIO)

5mm × 5mm RHB QFN32 (15 GPIO)

7mm × 7mm RGZ QFN48 (31 GPIO)

Peripheral

All digital peripheral pins can be connected to any GPIO

4 general purpose timer modules (8 × 16 bits or 4 × 32 bits, all with PWM)

12-bit Analog-to-Digital Converter (ADC), 200MSPS, 8-Channel Analog Multiplexer

Duration comparator

Ultra low power analog comparator

Programmable current source

UART

2x SSI (SPI, μW, and TI)

I2C

I2S

Real time clock (RTC)

AES-128 security module

True Random Number Generator (TRNG)

10, 15 or 31 GPIOs, depending on the package options used

Support 8 capacitive sensing buttons

Integrated temperature sensor

External system

On-chip internal DC-DC converter

Very few external components

Seamless integration with SimpleLink CC2590 and CC2592 range extenders

Pin compatible with SimpleLink CC13xx in 4mm × 4mm and 5mm × 5mm QFN packages

Low power consumption

Wide supply voltage range active mode RX: 5.9mA

Normal working voltage: 1.8V to 3.8V

External regulator mode: 1.7V to 1.95V

Active mode TX (0dBm): 6.1mA

Active mode TX (+5dBm): 9.1mA

Active mode MCU: 61μA/MHz

Active mode MCU: 48.5 CoreMark/mA

Active mode sensor controller: 8.2μA/MHz

Standby current: 1μA (RTC operation, RAM/CPU hold)

Shutdown current: 100nA (wake up when an external event occurs)

Radio frequency (RF) section

2.4GHz RF Transceiver Compliant with IEEE 802.15.4 PHY and MAC

Excellent receiver sensitivity (–100dBm), selectability and blocking performance

Application

Home and building automation

Lighting control

Alert and security

Electronic shelf label

Proximity Tag

wireless sensor network  

Energy harvesting / batteryless sensors and actuators

Smart grid